Filter
Top Products
4-Pole Motor and Gearbox
NOTE: MWD-R motor/gearbox is also used as a RWD-L motor/gearbox and MWD-L motor/gearbox is used
as a RWD-R. The part numbers are already switched around respectively for this MWD page.
Part Number Part Description
W.S.T. 250 lb. Limit, 300lb.
Limit or Power Tilt Only
400 lb. Limit
1108978
1108978
Screw, SHC
(M6 x 1 x 20MM)
9.
See Note(s) C See Note(s) C
10829841082984
Plastic Tip
Before 10/29/01
10.
11017251101725
Plastic Tip
After 10/28/01
10.
10829851082985Slotted Plate11.
10715051071505
Screw, Socket Head Cap
w/ Patch (M6 x 20MM)
12.
10715041071504
Screw, Socket Head Cap
w/ Patch (M6 x 35MM)
13.
A - Coupling with Cup for chairs manufactured before 11/12/01 - Use part # 50000X007 as a direct replacement part.
B - After 11/11/01 Coupling with Cup was resized from approximately 1" to 1-5/16" diameter and can be used as a direct
replacement for part number 5165204
C - When a new gearbox or mounting screws are ordered, (2 ea.) metric and (2 ea.) non-metric screws (item 9) must be ordered.
Invacare Corp. utilizes alternate suppliers for this part number.
D - As of May 2008, the Metal Motor End Cap will be replaced with a Composite Motor End Cap. The change does not affect form,
fit, function or aesthetics.
NOTE:
62
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
99-223