Filter
Top Products
Conventional Back without Mounting Hardware
(16" Wide) Non-Manual Tilt - TDX SPREE
Only the Back Assembly needs to be replaced when changing back heights.
NOTE: Hook Fastener w/ Adhesive Back Kit must be ordered when a Back Pan or Back Assembly is
requested. This will allow the Loop Fastener w/ Adhesive on the Back Cover to attach properly.
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1125564 Back Assembly w/o Hardware (16" Wide x 15" High) 1 11 A
1124578 Back Pan (16" Wide x 15" High) 1 12 A
1097397 Back Cushion Assembly (17" Wide x 15" High) 1 13 B
1125723 Kit, Hook Fastener w/ Adhesive Back 1 14 C
1125724 Edge Trim, Vinyl Black (96" Long) Cut-To-Length 1 15
A - Description reflects materials actual width x height. Item is used for a 16" wide chair with an overall back height of 20"
B - Back cover and foam are sold as a back cushion assembly only. Description reflects actual back cushion material width x
Height. Back Cushion will be 1" wider than the chair width and used for a chairs overall back height of 20".
C - Hook Fastener w/ Adhesive Back Kit is used to attach the Back Cover to the Back Pan and must be ordered when a new
Back Pan or Back Assembly is requested.
NOTE:
78
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
07-082