Filter
Top Products
Rear Anti-Tipper
Standard seat angle is set at 3°, when changing to 6°, Anti-Tippers MUST be ordered. To determine chair
config. degree for Anti-Tippers, dealer should look in Service Manual #1088234. All notations of STF
heights are listed in book according to Wheel and Caster size.
Patriot with 0 deg. or 3 deg. Seat Angle (Before 6/24/99)
Kit Number
Seat to Floor
Height
Anti-Tipper Length Anti-Tipper Height
On Chair Model
Number
Caster Size
8"P1580A3-1/2"13-3/4"16-1/2, 17-1/2, 20"1050644
6" (SHE)
P1580SHE2-7/8"12-3/4"15-3/4"
1050641
See Note(s) A See Note(s) B
A - Anti-Rattle Collar not included on chairs built before 6/24/99 (use 1" Collar).
B - SHE stands for Super Hemi wheelchairs with 16-3/4" seat-to-floor height on chairs built before 6/24/99, and 15-1/2" seat-to-floor
height on chairs built after 6/23/99.
NOTE:
Standard seat angle is set at 3 deg., when changing the seat angle to 6 deg., Anti-Tippers MUST be ordered. To determine chair
configuration degree for Anti-Tippers, dealer should look in Service Manual number 1088234. All notations of STF heights are listed in book
according to Wheel and Caster size.
Patriot with 0 deg. or 3 deg. Seat Angle (After 6/23/99)
Kit Number
Seat to Floor
Height
Anti-Tipper Length Anti-Tipper Height
On Chair Model
Number
Caster Size
8"P15804-1/2"14"
17-1/2, 18-1/2,
19-1/2"
1090113
6"P1580A3-1/2"13-3/4"16-1/2, 17-1/2"1050644
6" (SHE)
P1580SH2-7/8"12-3/4"15-1/2"1050641
See Note(s) B
B - SHE stands for Super Hemi wheelchairs with 16-3/4" seat-to-floor height on chairs built before 6/24/99, and 15-1/2" seat-to-floor
height on chairs built after 6/23/99.
NOTE:
Standard seat angle is set at 3 deg., when changing the seat angle to 6 deg., Anti-Tippers MUST be ordered. To determine chair
configuration degree for Anti-Tippers, dealer should look in Service Manual number 1088234. All notations of STF heights are listed in book
according to Wheel and Caster size.
Patriot with 6 deg. Seat Angle (After 6/23/99)
Kit Number
Seat to Floor
Height
Anti-Tipper Length Anti-Tipper Height
On Chair Model
Number
Caster Size
8"N/A3-1/4"14-1/4"
17-1/2, 18-1/2,
19-1/2"
1090114
6"N/A2-1/4"12-3/4"16-1/2, 17-1/2"1090115
6" (SHE)
N/A1-3/4"10"15-1/2"1090116
See Note(s) A
A - SHE stands for Super Hemi wheelchairs with 16-3/4" seat-to-floor height on chairs built before 6/24/99, and 15-1/2" seat-to-floor
height on chairs built after 6/23/99.
NOTE:
Standard seat angle is set at 3 deg., when changing the seat angle to 6 deg., Anti-Tippers MUST be ordered. To determine chair
configuration degree for Anti-Tippers, dealer should look in Service Manual number 1088234. All notations of STF heights are listed in book
according to Wheel and Caster size.
96
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
99-110