Filter
Top Products
Quad Link Assembly (QL)
After 4/06/06
When converting an old style Quad Link that attaches to a mounting plate or (a Flex or Touch Pad
Joystick Tube) is currently on the chair then order the following for:
a) ASBA Seat; Quad Link Mtg. Hdwr. (item 4), Quad Link (item 1) & Ht. Adj. Joystick Tube Clamp (item 11)
b) Van Seat; Quad Link Mtg. Hdwr. (item 12), Quad Link (item 1) & Joystick Tube Clamp (item 22)
NOTE: Substitute (item 4 & 12) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is
currently on the chair.
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1140898 Quad Link (QL) and Instruction Sheet - Right 1 11
1140899 Quad Link (QL) and Instruction Sheet - Left 1 11
1140425 Kit, Quad Link Latch Hardware 1 12 A
1140424 Kit, Quad Link Screw Fastener Hardware 1 13 B
1142937 Kit, ASBA/ADJASBA Quad Link Mounting Hardware 1 14 C
Screw, Phillips Pan Head w/ Patch (10-32 x 3/4") 1 25
Screw, Phillips Pan Head (#10-32 x 1-1/8") 1 26
Cable Tie (11-1/2" Long) 1 17
Spacer, Joystick Tube 1 18
Tube, Joystick 2" Offest 1 19
Plug Button, Black (7/8") 1 110
1105414 Screw, Phillips Pan Head w/ Patch (10-32 x 3/4") 1 25
1093071 Clamp, Fixed Height Joystick Tube 1 111
1143042 Kit, Quad Link Mounting Hardware - Van Seat 1 112 D,F,F1
Plug Button, Black (7/8") 1 113
Locknut (1/4-20) 1 314
Tube, Joystick 2" Offest 1 115
Cable Tie (11-1/2" Long) 1 116
Spacer (1/4 x 3/8 x 1") 1 317
Screw, Hex Head (1/4-20 x 1-5/8") 1 318
Screw, Phillips Pan Head (#10-32 x 1-1/8") 1 219
Spacer, Joystick Tube 1 120
Screw, Phillips Pan Head w/ Patch (10-32 x 3/4") 1 221
1139681 Clamp, Van Seat Arm Joystick Tube 1 122
1134844 Instruction Sheet, Quad Link 1 1E
A - Latch Kit includes 4 ea. Button Head Cap Screws (10-32 x 3/8"), 2 ea. Latch Spring Assembly, 4 ea. Phillips Flat C'Sunk
Head Screws, 2 ea. Spring Catch Plates, 2 ea. Socket Head Set Screws (10-32 x 3/8")
B - Screw Fastener Kit includes 4 ea. Socket Head Shoulder Screws (3/8 x 3/8"), 2 ea. Socket Head Cap Screws (1/4-20 x
3/8"), 2 ea. Socket Head Set Screws (1/4-20 x 1/2"), 4 ea. Socket Head Set Screws (10-32 x 1/8")
C - Includes items 5-10.
D - Includes items 13-21.
E - Not Shown
F - If Quad Link is to be mounted on chairs w/ van seats built Before 4/07/06, then a new Upper Arm Asbly. (adj. height) or
complete Fixed Height Arm Asbly. must be ordered as well. See van seat arms category.
F1 - The new Arm Pads have 3 additional holes drilled in the armrest plate so that the quad link can be properly mounted.
NOTE:
112
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
04-050