Filter
Top Products
Quad Link Assembly (QL)
After 4/06/06
When converting an old style Quad Link that attaches to a mounting plate is currently on the chair then
order the following for Van Seat; Quad Link Mtg. Hdwr. (item 12), Quad Link (item 1) & Joystick Tube
Clamp (item 14)
NOTE: Substitute (item 4) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently
on the chair.
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1140898 Quad Link (QL) and Instruction Sheet - Right 1 11
1140899 Quad Link (QL) and Instruction Sheet - Left 1 11
1140425 Kit, Quad Link Latch Hardware 1 12 A
1140424 Kit, Quad Link Screw Fastener Hardware 1 13 B
1143042 Kit, Quad Link Mounting Hardware - Van Seat 1 14 C,E,E1
Plug Button, Black (7/8") 1 15
Locknut (1/4-20) 1 36
Tube, Joystick 2" Offest 1 17
Cable Tie (11-1/2" Long) 1 18
Spacer (1/4 x 3/8 x 1") 1 39
Screw, Hex Head (1/4-20 x 1-5/8") 1 310
Screw, Phillips Pan Head (#10-32 x 1-1/8") 1 211
Spacer, Joystick Tube 1 112
Screw, Phillips Pan Head w/ Patch (10-32 x 3/4") 1 213
1139681 Clamp, Van Seat Arm Joystick Tube 1 114
1134844 Instruction Sheet, Quad Link 1 1D
A - Latch Kit includes 4 ea. Button Head Cap Screws (10-32 x 3/8"), 2 ea. Latch Spring Assembly, 4 ea. Phillips Flat C'Sunk
Head Screws, 2 ea. Spring Catch Plates, 2 ea. Socket Head Set Screws (10-32 x 3/8")
B - Screw Fastener Kit includes 4 ea. Socket Head Shoulder Screws (3/8 x 3/8"), 2 ea. Socket Head Cap Screws (1/4-20 x
3/8"), 2 ea. Socket Head Set Screws (1/4-20 x 1/2"), 4 ea. Socket Head Set Screws (10-32 x 1/8")
C - Includes items 5-13
D - Not Shown
E - If Quad Link is to be mounted on chairs w/ van seats built Before 4/07/06, then a new Upper Arm Asbly. (adj. height) or
complete Fixed Height Arm Asbly. must be ordered as well. See van seat arms category.
E1 - The new Arm Pads have 3 additional holes drilled in the armrest plate so that the quad link can be properly mounted.
NOTE:
86
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
02-011