Filter
Top Products
7 SEAT AND ARMS
Part No. 1143205
29 Invacare® Lynx™ L-3 & Invacare® Lynx™ L-4 Scooters
7 Seat and Arms
7.1 Removing/Installing the Seat
Removing
1. Fold down seat back.
2. Pull up the seat lock lever.
3. Lift the seat assembly up and away from the seat post.
Installing
1. Lower the seat assembly onto the seat post.
2. Pull the seat lock lever up to allow the seat to drop into the locked
position.
3. Lift up on seat assembly to ensure the seat is secure.
FIGURE 7.1 Removing/Installing the Seat
ƽ
WARNING
After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely -
otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, turn power off and remove key from ignition.
Refer to Label Locations on page 9 for pinch point location.
ƽ
WARNING
Before use, ensure that the seat is in the locked position. The seat lever MUST be pulled up to the 90° position to allow the
seat to drop into the locked position. Otherwise, a fall from the scooter could occur causing bodily injury and/or damage to
the scooter.
For this procedure, refer to FIGURE 7.1.
Seat Lock
Lever
Seat
Assembly