Invacare KA-Vi Wheelchair User Manual


 
Part No 1171788 3 Invacare® Matrx® Vi and Kidabra-Vi
2.3 Weight Limitation and Model Numbers
3 Usage
3.1 Installing the Invacare Matrx Vi or Kidabra-Vi
1. Position the cushion so the material
identification tags (not shown) face the rear.
2. Align the hook and loop strips (not shown) on
the bottom of the cushion with those on the
wheelchair seat.
3. Position the cushion onto the wheelchair as far
back as possible.
4. Press down to ensure the hook and loop strips
are firmly engaged.
4 Care and Maintenance
4.1 Cleaning
Outer Cover
The cover can be wiped clean with a damp towel.
The cover can be removed for laundering. Carefully remove the cover by unzipping the zipper found on
the rear of the cushion. The zipper should be closed prior to laundering.
Machine wash using the delicate cycle and hang dry or tumble dry on low.
Inner Cover
The inner cover can be wiped clean with a damp cloth. The inner cover should not be removed from the
foam.
4.2 Inspection
Visually inspect parts including upholstery materials, foams (if accessible), and plastics, for deformation,
corrosion, breakage, wear or compression.
Refer to the chart for the weight limitation and stock model numbers.
Configured model numbers are: MA-Vi and KA-Vi
MA = Matrx Vi, KA = Matrx Kidabra Vi
Grey = size not available
WIDTH DEPTH WEIGHT
LIMIT*
12 IN
(30 CM)
14 IN
(36 CM)
15 IN
(38 CM)
16 IN
(41 CM)
17 IN
(43 CM)
18 IN
(46 CM)
20 IN
(51 CM)
12 in (30 cm) KA1212-VI KA1214-VI
150 lbs (68
kg)
14 in (36 cm) KA1412-VI KA1414-VI
MA1415-VI MA1417-VI 300 lbs
(136 kg)
16 in (41 cm)
MA1616-VI MA1618-VI MA1620-VI
18 in (46 cm) MA1816-VI MA1818-VI MA1820-VI
20 in (51 cm) MA2016-VI MA2018-VI MA2020-VI
22 in (56 cm)
MA2218-VI MA2220-VI
*Matrx-Vi Heavy Duty models are configured to order and have a weight limitation of 600 lb (272 kg). Heavy
Duty cushions are available in sizes ranging from from 18 to 30 inches wide and 18 to 26 inches deep.
Rear
Front
ƽ
WARNING
DO NOT continue to use this product if problems are discovered. Corrective maintenance can
be performed at or arranged through your equipment supplier.