Support User Manuals

Invacare ITFM Mobility Aid User Manual

Open as PDF

of 24

InTouch™ Flovair Seat 4 Part No 1141447

Removing/Installing Seat Covers

Removing the Outer Cover

ƽ WARNING

The covers are designed to protect the foam from moisture and to provide

fire retardency. DO NOT use the seat without either the inner or outer

cover. If the covers are torn, they must be replaced IMMEDIATELY.

1. Removetheseatfromtheseatingsurface.RefertoAttaching/RemovingSeat

To/FromSeatingSurfaceonpage 2.

2. Unziptheoutercover.

3. Removeseat,stillinsidetheinnercover,fromtheoutercover.

CAUTION

DO NOT remove both the outer cover and inner cover at the same time,

otherwise damage to the inner cover material may occur.

Installing Outer Cover

NOTE:Forthisprocedure,refertoFIGURE 2.

1. Positiontheseatwithinnercoverandthefluid/airinsertinplacetowardthe

rearoftheoutercover.

NOTE:Thefluid/airinsertisatthetopoftheinnercover.

NOTE:Thezipperisattherearandthestretchfabricisatthetopoftheoutercover.

2. Slidetheseatintotheoutercover.

3. Ziptheoutercoverclosed.

4. Reattachseatontoseatingsurface.RefertoAttaching/RemovingSeatTo/From

SeatingSurfaceonpage 2.

CAUTION

Use care not to snag the innercover in the outer cover zipper, or damage to

the inner cover will occur.

FIGURE 2 Removing/Installing Seat Covers - Installing Outer Cover

Outer

Cover

Inner Cover

Zipper

Seat

previous next