Support User Manuals

Invacare ITFG Mobility Aid User Manual

Open as PDF

of 24

Part No 1141447 5 InTouch™ Flovair Seat

Removing Inner Cover

NOTE:Forthisprocedure,refertoFIGURE 3.

1. Removetheseatfromtheoutercover.RefertoRemovingtheOuterCoveron

page 4.

2. Unflaptheinnercover.

3. Removetheseatfromtheinnercover.

Installing Inner Cover

NOTE:Forthisprocedure,refertoFIGURE 3.

1. Positiontheseatwiththefluid/airinserttowardtherearoftheinnercover.

NOTE:Thebacksurfaceoftheseatis

marked“REAR”.

2. Slidetheseatintotheinnercover.

3. Foldthetopflapov erandtuckit

intothebottomcover.

4. Foldthebottomflapback.

5. Reinstalltheseat,withinnercover

inplace,intotheoutercover.Refer

toInstallingOuterCoveronpage 4.

FIGURE 3 Removing Inner Cover -

Installing Inner Cover

Removing/Installing Pelvic Support Layer

NOTE:Forthisprocedure,refertoFIGURE 4onpage6.

NOTE:Theseatcomeswithafluid/airpelvicsupportlayer.

Removing Pelvic Support Layer

1. Removeseatfrominnerandoutercovers.RefertoRemoving/InstallingSeat

Coversonpage 4.

2. Unfastenthefrontstrap,therearstrap,andthetwosidestraps.

3. Lifttheexistingpelvicsupportlayerandremovefromthefoam.

Installing Pelvic Support Layer

1. Centerthepelvicsupportlayeronthefoamsothatthesidestrapsarecentered

inthecontoursoneachsideofthefoam.

2. Fastentherear,front,andsidestrapstogetheratthebottomofthefoam.

NOTE:DONOTover‐tightenthestraps.Thepelvicsupportlayermustbefreetomove

withtheseat.

3. Reinstallseatintoinnerandoutercovers.RefertoRemoving/InstallingSeat

Coversonpage 4.

Seat

Inner Cover

Insert - Toward

Rear of Inner

Cover

Top Flap

Bottom Flap

previous next