Filter
Top Products
Quad Link (QLA)
After 10/30/05
When converting an old style Quad Link that attaches to a mounting plate or (a Flex Tube or Touch Pad
Joystick Tube) is currently on the chair then order the following:
Quad Link Mtg. Hdwr. (item 4), Quad Link (item 1) & Ht. Adj. Joystick Tube Clamp (item 11)
NOTE: Substitute (item 4) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently
on the chair. Additional Joystick Mtg. Hdwr. must be ordered when a 1556 Heavy Duty Joystick or TCPD
Touch Pad are used.
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1140896 Quad Link with Adjustable Joystick Tray (QLA) and
Instruction Sheet - Right
1 11 F
1140897 Quad Link with Adjustable Joystick Tray (QLA) and
Instruction Sheet - Left
1 11 F
1140425 Kit, Quad Link Latch Hardware 1 12 A
1140424 Kit, Quad Link Screw Fastener Hardware 1 13 B
1139416 Kit, ASBA/ADJASBA Quad Link Mounting Hardware 1 14 C,C1
Screw, Phillips Pan Head w/ Patch (10-32 x 3/4") 1 25
Screw, Phillips Pan Head (#10-32 x 1-1/8") 1 26
Cable Tie (11-1/2" Long) 1 17
Spacer, Joystick Tube 1 18
Tube, Joystick 1/2" Offset 1 19
Plug Button, Black (7/8") 1 110
1105414 Screw, Phillips Pan Head w/ Patch (10-32 x 3/4") 1 25
1139422 Clamp, Height Adjustable Joystick Tube (ARM250) 1 111 H
1139925-NLA Kit, 1556 Heavy Duty Joystick To Quad Link
Mounting Hardware
1 112 D
Screw, Phillips Pan Head (#10-32 x 1/2") 1 213
Plate, 1556 HD Joystick Quad Link 1 114
1139683 Kit, TCPD Touch Pad To Quad Link Mounting
Hardware
1 115 E
Plate, TCPD Touch Pad Quad Link 1 116
Screw, Phillips Pan Head (#4-40 x 3/8") 1 417
1134844 Instruction Sheet, Quad Link 1 1G
A - Latch Kit includes 4 ea. Button Head Cap Screws (10-32 x 3/8"), 2 ea. Latch Spring Assembly, 4 ea. Phillips Flat C'Sunk
Head Screws, 2 ea. Spring Catch Plates, 2 ea. Socket Head Set Screws (10-32 x 3/8")
B - Screw Fastener Kit includes 4 ea. Socket Head Shoulder Screws (3/8 x 3/8"), 2 ea. Socket Head Cap Screws (1/4-20 x
3/8"), 2 ea. Socket Head Set Screws (1/4-20 x 1/2"), 4 ea. Socket Head Set Screws (10-32 x 1/8")
C - Includes items 5-10. The Quad Link Mounting Hardware accommodates MKIV RII, A, A+, PSF/PSR joysticks.
C1 - When ordering the Quad Link for the first time, Additional hardware is required for 1556 Heavy Duty and TCPD Touch
Pad joysticks. See pictorial for reference.
D - Includes items 13 and 14
E - Includes items 16 and 17
F - The 4-Way Switch and Single Function Toggle Switch (TRSS) Mounting Plates have changed and may be required when
converting a Quad Link assembled to a mounting plate over to a Quad Link introduced after 10/30/05
G - Not Shown
H - Individual components are non-saleable
NOTE:
119
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
01-038