Invacare CMEX Mobility Aid User Manual


 
6
Invacare
®
Cushions
Invacare
®
Cushions
Invacare
®
Single Density Cushion
Model no. SD
Contoured deformation cut foam provides com-
fort and stability
Available in over 100 custom sizes
Water repellent cover with non-slip bottom
Cushion Thickness
A. Height at rear (adductor) 2"
B. Height at rear (center) 1.5"
C. Height at front 2.5"
Cushion weight approximately 2 lb.
C
B
A
ViscoFoam
Model no. ILCVF, IGCVF, IMCVF
ViscoFoam is an excellent choice for clients who:
Are at high risk of skin breakdown
Require excellent support and stability
Require a lightweight cushion
FloGel
®
Model no. ILCFG, IGCFG, IMCFG
FloGel
®
is an excellent choice for clients who:
Are at high risk of skin breakdown
Require excellent support and stability
Require a good dynamic shear reduction
AirFlo
Model no. ILCAIR, IGCAIR, IMCAIR
AirFlo
is an excellent choice for clients who:
Have a history of or are considered to be at
very high risk of skin breakdown
Require an air flotation insert for immersion
of bony prominences
Require a postural support base for stability
LoContour
LoContour is an excellent choice for clients who:
Have good postural control
Have low to normal muscle tone
Laterally transfer
Foot propel
Gentle Contour
Gentle Contour is an excellent choice for clients
who:
Have moderate postural instability
Require gentle control of tone
Need moderate control of
abduction/adduction tendency
Max Contour
Max Contour is an excellent choice for clients
who:
Require high level of postural control
Need maximum control of tone
Require optimal pressure reduction
and redistribution
Invacare
®
Infinity
®
Cushions
Application
Comfort
Adult and geriatric, able to do own weight shift for pressure relief
Good rental wheelchair cushion
5
Invacare
®
Cushions
Invacare
®
Cushions
Positioning Support Base
The support base of the TargIT cushion is constructed with molded
polyurethane foam contoured to promote comfort, enhance positioning
and prevent bottoming out.
Features: Functional Benefits:
Medial Thigh Support (Abductor) Gentle control of mild adduction tendency
Raised Adductors Positioning guidance to maintain proper
alignment of lower extremities
Mild Hip Guides Adductors are extended posteriorly to keep
user centered on cushion
Pre-contoured sacral area Provides additional comfort and support
for those sitting in anterior to posterior
pelvic tilt
Pre-ischial shelf w/ 15˚ drafted Limits forward migration of pelvis and
edge sliding out of position
Low profile (Gentle) Reduces seat-to-floor height for foot
propulsion and lateral transfers
Ideal for clients who require a mild to
moderate level of postural support
Deep IT relief well (Max) Provides maximum pelvic immersion and
control
Ideal for clients who require a moderate to
high level of postural support
with
Technology
Invacare
®
InTouch
TargIT
is the industry standard for consumers who require moderate skin protection and positioning. The
large, anatomically-shaped pelvic surface of the InTouch cushion eliminates the guesswork of placing a consumer in contact with
pressure-relieving material. The construction of the InTouch TargIT incorporates an exclusive Blend
2
foam molding technology
that fuses the poly urethane base foam with visco-elastic pressure-relieving foam to eliminate transitional edges, providing worry-
free fit and comfort.
Features
Model no. ITTG, ITTM
InTouch
Zone technology
Blend
2
foam molding technology
Sacral relief
Gentle/Contour
Bariatric sizes available
InTouch
TargIT
Max and Gentle Contour Cushion
Gentle Max
Contour Contour
A. Height at adductor 3.625" 4.35"
B. Height at abductor 3.625" 4.35"
C. Height at leg trough 2.50" 2.85"
Contour Thickness
InTouch
TargIT
Gentle Contour
InTouch
TargIT
Max Contour
HCPCS Code = E2607, E2608