Filter
Top Products
Oxygen Holder 2 Part No 1164890
2 Safety
To ensure the safe and proper installation of the oxygen holder, these instructions and
warnings MUST be followed.
Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use.
Contact carrier/dealer for further instruction.
ƽ
WARNING
DO NOT USE THIS PRODUCT OR ANY AVAILABLE OPTIONAL EQUIPMENT
WITHOUT FIRST COMPLETELY READING AND UNDERSTANDING THESE
INSTRUCTIONS AND ANY ADDITIONAL INSTRUCTIONAL MATERIAL SUCH
AS OWNER’S MANUALS, SERVICE MANUALS OR INSTRUCTION SHEETS
SUPPLIED WITH THIS PRODUCT OR OPTIONAL EQUIPMENT. IF YOU ARE
UNABLE TO UNDERSTAND THE WARNINGS, CAUTIONS OR INSTRUCTIONS,
CONTACT A HEALTHCARE PROFESSIONAL, DEALER OR TECHNICAL
PERSONNEL BEFORE ATTEMPTING TO USE THIS EQUIPMENT - OTHERWISE,
INJURY OR DAMAGE MAY OCCUR.
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
ƽ
ACCESSORIES WARNING
Invacare products are specifically designed and manufactured for use in conjunction with
Invacare accessories. Accessories designed by other manufacturers have not been
tested by Invacare and are not recommended for use with Invacare products.
ƽ
INSTALLATION WARNING
The installation of the oxygen holder onto the back of the scooter seat significantly
increases the length of the scooter. When turning the scooter or swiveling the scooter
seat, it is important to take note of this increased length - otherwise, injury and/or
damage to the surrounding property may result.