Invacare ACC210 Mobility Aid User Manual


  Open as PDF
of 4
 
Part No 1164889 3 Walker Holder
3 Usage
3.1 Using the Walker Holder
1. If necessary, loosen but DO NOT remove the mounting knob.
2. Install the walker holder into the accessory tube.
3. Install the mounting knob to secure the walker holder to the accessory tube.
4. Loosen the adjustment knob.
5. Adjust the walker holder to the desired height.
6. Tighten the adjustment knob to secure the walker holder in one of four mounting holes.
7. Fold the walker.
8. Hang the walker in the slot and use the strap to secure it.
FIGURE 1 Using the Walker Holder
For this procedure, refer to FIGURE 1.
Reverse STEPS 1-3 to remove the walker holder.
Walker MUST be folded before using walker holder.
Walker Holder
Accessory Tube
Mounting Knob
Adjustment
Knob
Slot
Adjustment
Holes
Strap
 previous