Filter
Top Products
Essentia Cushion 2 Part No. 1078995
ATTACHING THE CUSHION TO THE SEATING
SURFACE (FIGURE 1)
The cushion attaches to the wheelchair seating surface using hook and loop fastening
straps.
CUSHION COVER
The bottom of the cushion cover is equipped with two (2) strips of the loop portion of
the fastening strap.
Attached to the loop portion are two(2) strips of double-sided hook.
WHEELCHAIR SEATING SURFACE
1. Determine whether the wheelchair seating surface has hook or loop attachment
strips.
2. If the wheelchair has loop attachment strips, verify that the double sided hook strips
are securely attached to the loop attachment strips on the bottom of the cushion.
NOTE: The zipper on the cushion should face rearward.
3. Align the front edge of the cushion with the front edge of the seating surface.
4. Secure the cushion to the seating surface, making sure that the double sided hook is
securely attached to the strips of loop on the cushion cover and the chair.
WARNING
Make sure the hook and loop fastening straps are securely attached
between the seating surface and cushion before using. If the cushion is not
secured to the wheelchair seating surface, exercise caution when
transferring in and out of the wheelchair.
5. If the wheelchair has hook attachment strips, remove the double sided hook strips
from the cushion.
6. Align the front edge of the cushion with the front edge of the seating surface.
7. Secure the cushion to the seating surface, making sure that the strips of loop on the
cushion cover are securely attached to the strips of hook on the chair.
8. If the wheelchair seating surface has neither hook or loop attachment strips, remove
the double sided hook from the bottom of the cover.
9. Align the front edge of the cushion with the front edge of the seating surface.
10. Place the cushion on the wheelchair seating surface.