Support User Manuals

Invacare 9000 XDT Mobility Scooter User Manual

Open as PDF

of 88

SECTION 4—FRONT CASTERS

9000 Series 26 Part No. 1076155

SECTION 4—FRONT CASTERS

ƽ WARNING

After any adjustments, repair or service and before use, make sure all attaching

hardware is tightened securely. Otherwise, injury or damage may occur.

Front Caster Mounting Adjustments

NOTE:Forthisprocedure,refertoFIGURE4.1.

1. Removethehexscrew,washers(ifsoequipped)andlocknutthatsecurethefront

castertothefork.

2. Repositionthefrontcasterontheforktothedeterminedmountinghole.Referto

ChangingSeat‐to‐FloorHeight/Seat‐to‐FloorAngleonpage 29todeterminefront

castermountingholeforfrontcastersizeandseat‐to‐floorheight.

3. Securefrontcastertoforkwithexistinghexscrewandlocknut.Securelytighten.

ƽ WARNING

Make sure both front casters are positioned in the same mounting hole before using

the wheelchair. Otherwise, injury may result.

4. RepeatSTEPS1‐3fortheoppositefrontcaster.

FIGURE 4.1 Front Caster Mounting Adjustments

Fork

Front

Caster

Washer

Locknut

Washer

Hex Screw

previous next