Rehab Shower Commode Chair 26 Part No. 1118394
ARMS
REPLACING ARMREST PAD (FIGURE 3)
1. Remove the mounting screws that secure the armrest pad to the arm.
2. Replace armrest pad and securely tighten with the existing mounting screws.
POSITIONING SWING-BACK ARMS (FIGURE 2)
WARNING
Make sure the armrest release lever is in the locked position before using
the Rehab Shower Commode chair.
1. Unlock the swing-back arm by pressing the arm release lever towards the arm
frame.
2. Pull the front of the swing-back arm straight up/out of the arm socket and push back
towards the rear of the Shower Commode chair.
3. To lock the swing-back arm, pull the swing-back arm forward and then push down-
ward into the arm socket until an audible "click" is heard.
FIGURE 2 - SWING-BACK ARMS
Arm Release
Lever
Arm Socket
Swing- Back Arm
UNLOCK
LOCK
Arm Frame
SECTION 8 ARMS
Arm
Armrest Pad
FIGURE 3 - REPLACING ARMREST PADS
Mounting
Screws