Support User Manuals

Invacare 1141448 Wheelchair User Manual

Open as PDF

of 28

Part No 1141448 5 InTouch™ Stabilite Seat

Installing Inner Cover

NOTE:Forthisprocedure,refertoFIGURE 3.

1. PositiontheseatwiththeThinAirbladderinsertlayertowardtherearofthe

new/existinginnercover.

NOTE:Thebacksurfaceoftheseatismarked“REAR”.

2. Slidetheseatintotheinnercover.

3. Foldthetopflapov erandtuckintothebottomofthecover.

4. Foldthebottomflapback.

5. Reinstalltheseat,withinnercoverinplace,intotheoutercover.Referto

InstallingOuterCoveronpage 4.

FIGURE 3 Removing Inner Cover - Installing Inner Cover

Removing/Installing Pelvic Support Layer

NOTE:Forthisprocedure,refertoFIGURE 4onpage6.

NOTE:TheseatcomeswithaThinAirbladderpelvicsupportlayer.

Removing Pelvic Support Layer

1. Removeseatfrominnerandoutercovers.RefertoRemoving/InstallingSeat

Coversonpage 3.

2. Unfastentherearstrapandthetwosidestraps.

3. Lifttheexistingpelvicsupportlayerandremoveitfromtheseat.

Installing Pelvic Support Layer

1. Centerthepelvicsupportlayeronthefoamsothatthesidestrapsarecentered

inthecontoursoneachsideofthefoam.

2. Fastenthesidestrapsandrearstraptothebottomofthefoam.

NOTE:DONOTover‐tightenthestraps.Thepelvicsupportlayermustbefreeto

move

withtheseat.

Seat

Inner Cover

Insert - Toward Rear of Inner Cover

Top Flap

Bottom Flap

previous next