Filter
Top Products
2
Contracture Assembly
Insert
Tube
Washers
Mounting
Holes
Mounting
Screws
Lock Nuts
2. Align the mounting holes of the contracture footplate
assembly with two (2) desired mounting positions of
the crossmember assembly.
3. Secure the contracture assembly to the crossmember
assembly with two (2) mounting screws, washers and
locknuts provided. Securely tighten.
4. If necessary, repeat STEPS 1-6 for the other con-
tracture assembly.
FIGURE 3 - REMOVING/INSTALLING THE
CONTRACTURE ASSEMBLY - REVERSED MOUNT
Installing the Contracture Assembly - Forward
Mount (FIGURE 2)
NOTE: Refer to the GENERAL WARNINGS and INSTAL-
LATION WARNINGS in the
SAFETY SUMMARY of this
instruction sheet.
NOTE: The number of mounting positions on the contrac-
ture assembly may vary due to the width of the wheelchair.
1. Align the mounting holes of the outer tube with the
mounting holes of the insert tube of the crossmember
assembly.
Installing the Contracture Assembly -
Reversed Mount (FIGURE 3)
NOTE: Refer to the GENERAL WARNINGS and INSTAL-
LATION WARNINGS in the
SAFETY SUMMARY of this
instruction sheet.
1. Remove the contracture footplate. Refer to CON-
TRACTURE FOOTPLATE HEIGHT ADJUSTMENT
in this instruction sheet.
2. Align the mounting holes of the contracture footplate
assembly with two (2) desired mounting positions of
the crossmember assembly.
3. Secure the contracture assembly to the crossmember
assembly with two (2) mounting screws, washers and
locknuts provided. Securely tighten.
4. Reinstall the contracture footplate. Refer to
CONTRAC-
TURE FOOTPLATE HEIGHT ADJUSTMENT.
5. If necessary, repeat STEPS 1-4 for the other contrac-
ture assembly.
Outer Tube
Contracture
Assembly
Insert Tube
Washers
Mounting Holes
Mounting Screws
Lock Nuts
Outer Tube
FIGURE 2 - REMOVING/INSTALLING THE
CONTRACTURE ASSEMBLY - FORWARD MOUNT
Shoulder Screw
Seat Frame
(Rear)
Bearing
Housing
Allen
Screw
Spacer
Link
Bracket
Lower Seat Frame
Base
Frame
Locknut
Locknut
Seat Frame
DETAIL “A”
Seat Frame
Mounting Screws
Lock Nuts
Crossbrace
(Rear)
Insert Tube
Outer Tube
Brace Support
Seat
Frame
Brace Support
DETAIL “B”
FIGURE 1 - INSTALLING THE CROSSMEMBER
ASSEMBLY