Filter
Top Products
2
Rear Armrest
Socket
Right Chair
Frame
Right Outside
Armrest Bracket
Right Inside
Armrest Bracket
Locknuts
Armrest
Spacer
Outside
Armrest Bracket
Inside
Armrest Bracket
Hex Screw
Tube Support
DETAIL “A”
TOP VIEWS
Hex Screws
Left Outside
Armrest Bracket
Armrest
Spacer
Rear Armrest
Socket
Tube
Support
Left Inside
Armrest Bracket
Locknuts
Left Chair Frame
Mounting
Hole
Right
Left
INSIDE
OUTSIDE
OUTSIDE
Armrest Spacers
REAR ARMREST SOCKET
INSTALLATION ON WHEELCHAIRS
BUILT BEFORE 7/00
Space Saver Armrest Sockets (FIGURE 2)
Space Saver Kit No. 1036793 Includes the following:
DESCRIPTION QTY.
Left Outside Armrest Bracket 1
Left Inside Armrest Bracket 1
Left Armrest Spacer 1
Right Outside Armrest Bracket 1
Right Inside Armrest Bracket 1
Right Armrest Spacer 1
Front Armrest Socket 2
Rear Armrest Socket 2
Tube Supports 2
Hex Screw 8
Locknuts 8
1. Insert the tube support into armrest socket.
NOTE: Tube support MUST be positioned below mount-
ing hole.
2. Position the outside armrest bracket towards the out-
side of the chair frame.
3. Position the armrest spacer flush against the inside
of the outside armrest bracket as shown in “DETAIL
A”, FIGURE 2.
4. Place the armrest socket into the groove of the arm-
rest spacer.
5. Position inside armrest bracket against the armrest
socket (FIGURE 2).
6. Loosely secure the brackets, armrest socket and arm-
rest spacer together using one (1) of the six (6) hex
screws and a locknut.
7. Position the armrest bracket on the rear frame making
sure that the armrest spacer is positioned on the outside
of the rear armrest socket. Refer to Detail “A” in FIGURE 2.
8. Secure the assembly of the chair frame using two (2) of
the six (6) hex screws and locknuts.
CAUTION
Make sure that all screws and locknuts
are secure at all times.
9. Repeat this procedure for the opposite side of the chair
frame.
FIGURE 2 - REAR ARMREST SOCKET INSTALLATION - SPACE SAVER ARMS