Filter
Top Products
8
ADJUSTMENT TROLLEY LCA060S TO 250Q « LR »
WARNING
Before installing read "SAFETY INFORMATION",
Make sure trolley wheels are compabible with the
beam. Tapered wheels are for use only with "I"
beams (IPN) ; flat tread wheels are for use only with
"H" type beams (IPE).
NOTICE
Trolley wheels ride on the top of the lower flange of
the beam.
During assembly lubricate gears, nuts, capscrews,
and all machined threads with applicable lubricants.
Use of antiseize compound and/or thread lubricant
on capscrew and nut threaded areas prevents
corrosion.
Adjustment Trolley
Refer.Dwg.D5440207
According to travelling beam used
The adjustment is realized with the distance washer :
2.5-3-3,5 - 5 - 6 - 10 - 15 and 35 mm thick
(Rep. 23-26-27-28-35-36-43-52).
1. Stack un the washers as notified on the following
sheet.
2. Position the tightening washers Rep. 31.
3. Tighten the nuts Rep. 51 at 110 mdaN.
Tightening washer Distance Trolley Distance Hoist Distance Trolley flange Distance Tightening washer
+ nut washer flange washer washer washer +nut
Rolling beam
Additionnal thickness
of distance washer
Thickness of
distance washer
Thickness of
distance washer
to make use adjustment
Additionnal thickness
of distance washer
to make use adjustment
IPN 360-143
35+15+10+6+5+3.5+3.5+3+2.5
0
0
2.5+3+3.5+5+6+10+15+35
IPN 400-155
35+15+10+5+3.5+3.5+3+2.5
6
6
2.5+3+3.5+3.5+5+10+15+35
IPN 450-170
35+15+10+3.5+3.5+3
2.5+5+6
6+5+2.5
3+3.5+3.5+10+15+35
IPN 500-180
35+10+5+3.5+3.5+3+2.5
6+15
15+6
2.5+3+3.5+3.5+5+10+35
IPN 550-200
35+6+5+3.5+3+2.5
3.5+10+15
15+10+3.5
2.5+3+3.5+5+6+35
IPN 600-215
35+3.5+3.5+3+2.5
5+6+10+15
15+10+6+5
2.5+3+3.5+3.5+35
IPE 300-150
35+15+10+6+5+3.5+3+2.5
3.5
3.5
2.5+3+3.5+5+6+10+15+35
IPE 330-160
35+15+10+6+3.5+3+2.5
3.5+5
5+3.5
2.5+3+3.5+6+10+15+35
IPE 360-170
35+15+10+3.5+3.5+3
2.5+5+6
6+5+2.5
3+3.5+3.5+10+15+35
IPE 400-180
35+10+6+5+3.5+3+2.5
3.5+15
15+3.5
2.5+3+3.5+5+6+10+35
IPE 450-190
35+10+6+3.5+3+2.5
3.5+5+15
15+5+3.5
2.5+3+3.5+6+10+35
IPE 500-200
35+6+5+3.5+3+2.5
3.5+10+15
15+10+3.5
2.5+3+3.5+5+6+35
IPE 535-210
35+5+3.5+3.5+3
2.5+6+10+15
15+10+6+2.5
3+3.5+3.5+5+35
IPE 600-220
15+10+6+5+3.5+3+2.5
3.5+35
25+3.5
2.5+3+3.5+5+6+10+15
HE 240
15+6+5+3.5+3+2.5
3.5+10+35
35+10+3.5
2.5+3+3.5+5+6+15
HE 248
15+6+3.5+3.5+3
2.5+5+10+35
35+10+5+2.5
3+3.5+3.5+6+15
HE 260
15+3.5+3.5+3
2.5+5+6+10+35
35+10+6+5+2.5
3+3.5+3.5+15
HE 268
6+5+3.5+3.5+3
2.5+10+15+35
35+15+10+2.5
3+3.5+3.5+5+6
HE 280
6+3.5+3+2.5
3.5+5+10+15+35
35+15+10+5+3.5
2.5+3+3.5+6
HE 288
6+5
2.5+3+3.5+3.5+10+15+35
35+15+10+3.5+3.5+3+2.5
5+6
HE 290
3.5+3.5+3
2.5+5+6+10+15+35
35+15+10+6+5+2.5
3+3.5+3.5
HE 300
5
2.5+3+3.5+3.5+6+10+15+35
35+15+10+6+3.5+3.5+2.5
5
HE 305
2.5
3+3.5+3.5+5+6+10+15+35
35+15+10+6+5+3.5+3.5+3
2.5
HE 310
0
2.5+3+3.5+3.5+5+6+10+15+35
35+15+10+6+5+3.5+3.5+3+2.5
0