Hotpoint NWXR473 Hair Dryer User Manual


 
Operating Instructions
Other dryer features your model has
Before replacing the light bulb,
be sure to unplug the dryer power
cord or disconnect the dryer at the
household distribution panel by
removing the fuse or switching
off the circuit breaker. Reach
above dryer opening from inside
the drum. Remove the bulb and
replace with the same size bulb.
Drum Lamp
10
Use this option to minimize the
wrinkles in clothes. The option
provides approximately 15
minutes of no-heat tumbling
after the clothes are dry.
This option can only be used with
the Automatic cycles.
HINT:
If the Signal option is selected, the
Signal will sound at the end of the
drying time and will sound several
times during the Press Guard cycle.
This will remind you that the cycle
is almost complete.
Press Guard
SET
OFF
The signal control can be set at
OFF, MEDIUM or LOUD.
This signal will sound just before
the end of the cycle to remind you
to remove the clothes.
If you selected the Press Guard
option the signal will sound at the
end of the drying time and will
sound several times during the Press
Guard cycle. This will remind you
that the cycle is almost complete.
NOTE:
Remove garments promptly at the
sound of the signal. Place clothes
on hangers so wrinkles won’t set in.
Use the Signal especially when
drying fabrics like polyester knits
and permanent press. These fabrics
should be removed promptly so
wrinkles won’t set in.
Signal
LOUD
OFF
MEDIUM