Filter
Top Products
2. Press or to set the desired language for the weekday
display. The selection sequence is: “EN” for English,
“SP” for Spanish, “FR” for French, “GE” for German,
and “IT” for Italian.
˚C or ˚F TEMPERATURE DISPLAY SELECTION
1. When the weekday language is set, press MODE.
2. “˚F” will flash prompting the Fahrenheit display.
3. Press or to select desired temperature unit: “ ˚F ”
for Fahrenheit or “˚C” for Celsius.
EXIT THE MANUAL SETTING MODES
* When the temperature display is set, press MODE to
return to the default hours, minutes and seconds display.
* If no key is pressed for 30 seconds, the unit will return
to default-time display.
VIEWING THE ALARM TIME SETTINGS
There are 3 different alarms available:
Weekday alarm, Single alarm and the Pre-alarm.
* Weekday Alarm
The alarm will sound and alarm “ ” will flash at the at
the set time Monday through Friday.
* Single Alarm
The alarm will sound and the alarm icon “ ” will flash
at the set time. This is useful for weekends, holidays or any
day when you wish to wake up at a time other than your
normal weekday alarm time. No need to reset your regular
alarm time. This alarm can be bypassed during the set up
if you choose not to use it.
CALENDAR CLOCK DISPLAY MODES
Both an alarm time and the calendar share the same section
of the display. The next line displays the current time with
seconds and the day of the week. The calendar is displayed
in the month and day format.
If the alarm time is displayed, press MODE to display
the calendar in month-day format. Each press on the
MODE button will change the display between the time
with the seconds and the time with the day of the week.
THE DATE AND TIME SETTING
1. Press MODE to change to the Hour/Minute/ Weekday
display mode. Select the Time Zone by pressing and
holding the button for 3 seconds. Keep holding until
the desired time zone (Pacific, Mountain, Central or
Eastern) is displayed. A dark section on the map
indicates the time zone selected.
2. Press and hold MODE for 3 seconds: The year digit
will flash. Press or to select the year.
3. Press MODE again: The month digit will flash.
Press or to select the month.
4. Press MODE again: The date digit will flash.
Press or to select the date.
5. Press MODE again: The “12 Hr” digit will flash to
prompt for 12/24 hour format. Press or to select
“12” or “24 Hr” for desired time format.
6. Press MODE again: The hour digit will flash.
Press or to select the hour.
7. Press MODE again: The minute digit will flash.
Press or to select the minute.
LANGUAGE SETTING
The weekday may be displayed in one of five languages:
English, Spanish, French, German, or Italian
1. After the minute is set, press MODE, and the weekday
display will indicate the current preset language
Example: “EN” for English.
W
S