HoMedics FM-CR Pedicure Spa User Manual


 
5
Caution: Please read all instructions
carefully before operating.
This product is not intended for medical use. It is intended only
to provide a luxurious massage.
• If you have any concerns regarding your health consult your
doctor before using this product.
• In case of pregnancy, diabetes, pacemaker use, illness or
any medical condition, consult your doctor before
using massager.
• Not recommended for use by Diabetics.
• NEVER leave the appliance unattended, especially if children
are present.
• NEVER cover the appliance when it is in operation.
• DO NOT use this product for more than 20 minutes at a time.
• Extensive use could lead to the product’s excessive heating
and shorter life. Should this occur, discontinue use and allow
the unit to cool before operating.
NEVER use this product directly on swollen or inflamed areas
or skin eruptions.
• DO NOT use this product before bed. The massager has a
stimulating effect and can delay sleep.
• NEVER use this product while in bed.
• This product should NEVER be used by any individual
suffering from any physical ailment that would limit the user’s
capacity to operate the controls.
This unit should not be used by children or invalids without
adult supervision.
Caution:
To avoid injury
and irreparable
damage, always
remain seated
when using
massager.
Never stand on
the unit.
4
Instructions for Use
To reduce the risk of electrocution, this appliance is equipped
with a polarized plug (one blade wider than the other). This plug
will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change
the plug in any way.
1.Plug into a 120-volt outlet.
2.It is highly recommended that the foot massager be used with
socked feet. Do not use the unit with shoes.
3.Place massager on the floor in front of your chair or seat.
4.To activate massage action, press Power button once. The
LED illuminator will glow blue (fig. 1).
Tip: By changing the pressure of your feet on the massager,
it will change the feel of the massage. If the unit tickles you,
then you may need to apply more pressure or you may need
to become accustomed to the sensation. If the massage feels
too strong, you may need to lighten the pressure of your feet
on the unit.
5.To activate heat with the massage, press the Power
button a second time. The LED illuminator will glow red (fig 2).
Allow a few moments for the heating action to warm up.
6.Select between Massage and Massage & Heat.
7.When finished, turn the unit “OFF” and unplug. “OFF” is
reached by pressing the Power button until the unit turns off.
(The first press of the power button turns on the massage
function; the second press turns on the heat function, and the
third press turns the unit off.)
NOTE: As a safety feature, the Heat function cannot be
used alone.
fig. 1
fig. 2