HoMedics FB-30 Pedicure Spa User Manual


 
6
Bubble Bliss Features
Rejuvenating bubbles provide a relaxing massage
Heat helps maintain water temperature
Raised nodes in floor reinvigorate tired, sore feet
Splash guard with foot rest; convenient for pedicures
Instructions for Use
1. Ensure that the unit is unplugged before filling with water. Fill with warm
water to the fill line located on the inside of the tub (Fig 1).
NOTE: Heat will only help to maintain the temperature of water placed
inside the footbath. It will not heat cold water. For a warm water massage,
fill the unit with warm water.
2. Plug the unit into a 120 volt household outlet.
3. Press power button once to turn on bubbles and heat (Fig 1).
4. While seated, place your feet in the spa.
5. Enjoy a deep soothing massage by sliding feet back and forth over the
raised nodes on the footbath floor.
6. When finished, depress power button once.
7. To empty: First, unplug the unit. Tip the unit, allowing water to pour out
along the drain spout. DO NOT pour water over the power button (Fig 1).
Maintenance
To Clean
Unplug the unit and allow it to cool before cleaning. Clean only
with a soft, damp cloth and mild cleansing agent.
After cleaning, wipe surfaces with a dry cloth.
Never use strong abrasives, detergents or cleansing agents.
Periodically straighten cord if it becomes twisted.
To Store
Unplug the appliance from the outlet and allow to cool and dry.
Store in its box or a clean, dry place.
To avoid breakage, do not wrap the power cord around the unit.
Do not hang the unit by the power cord.
This appliance is designed for household use only.
CAUTION:
DO NOT FILL WATER OVER THE FILL LINE
Power Button
Drain Spout
Fill Line
Caution:
To avoid injury
and irreparable
damage, always
remain seated
when using this
footbath. Never
stand on or in
the unit.
CAUTION: THIS
UNIT CAN ONLY
RUN WITH
WATER IN IT.
DO NOT USE
WITHOUT
WATER.
Figure 1
7