HoMedics BPW-060 Blood Pressure Monitor User Manual


 
1413
Replace the batteries if:
1.Theweakbattery
symbol appears in the
display.
2. Nothing appears in the
display when the power
is switched on.
As the supplied batteries
are for test only, they may
be discharged earlier than
batteries you buy in stores.
INSTALLING BATTERIES
1.Thebatterycover
is located along the
bottom side of the
monitor. Remove battery
cover by pressing down
and pulling away from
the monitor.
2. Install batteries
according to the polarity
indications inside the
compartment (as shown
in figure 2).
Battery Type:
2 Alkaline LR03
(AAA) size
3. Place in the other
battery, according to the
polarity indications inside
the compartment (as
shown in figure 3).
4. Replace the cover by
inserting it back into
place.
1.
2.
3.
4.
Replacethebatteriesinpairs.Useonly1.5V
AAA alkaline batteries. Remove batteries
when unit is not in use for extended periods
of time. Date and time will need to be reset if
batteries are removed or replaced.
Note: Batteries are hazardous waste.
Do not dispose of them together with
the household garbage.