Filter
Top Products
INSTALLING BATTERIES
1. Press down on latch and lift the battery cover to
open the battery compartment.
2
. Install or replace 4 “AA” sized batteries in the
battery compartment according to the indications
inside the compartment.
3. Close the battery cover by pushing in the top end
of the battery door.
Replace the batteries if:
1. The weak battery symbol appears on the display.
2
. Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may
be discharged earlier than batteries you buy in stores.
Replace the batteries in pairs. Use only 1.5V AA
alkaline batteries. Remove batteries when unit is not
in use for extended periods of time. Date and time will
need to be reset if batteries are removed or replaced.
Note: Batteries are hazardous waste. Do not dispose
of them together with the household garbage.
12
11
USING THE AC ADAPTER
Note: • Please unload the batteries when operating
with an AC adapter for an extended period of
time. Leaving the batteries in the compart-
ment for a long time may cause leakage,
which may lead to damage of the unit.
•
No batteries are needed when operating with
an AC adapter.
• Date and time will need to be reset if AC
adapter is unplugged.
1. Connect the AC adapter with the AC adapter jack
in the back of the unit as shown below.
2. Please use only the AC adapter included with this
monitor.
AC Adapter
Input: 100-240V~0.2A 50/60Hz
Output: 6V DC 500mA 3 W Max
Connect AC
adapter here
Battery
Cover