Filter
Top Products
20
Storing, recalling, and erasing measurement data/2 Zones of 60 Memory
2 Zones of 60 Memory
When you take a measurement, the monitor automatically stores it in
memory space number one. As you continue to take measurements, the
monitor will push the previous measurement back one space. In other
words, the value in space one will always be the most recent blood pres-
sure measurement taken.
Your monitor features a 2 party memory capability or 2 "zones" - each
zone stores 60 measurements each for a total capacity of 120 measure-
ments. This feature is useful for a user to track their blood pressure
throughout the various periods of the day: morning, afternoon, or night.
Press the
" " button to toggle between memory zone No.1, and 2.
Once you select a zone that you want to view the measurements in,
press the "MEMORY" button once to view the most recent measure-
ment along with the time and date that it was taken. Press the "MEM-
ORY" button again in succession and you will see all of the measure-
ments registered to that zone. You can then press the
" " button to
switch to the next zone to view measurements. The monitor will auto-
matically power off after about one minute of inactivity.
*When taking measurements, be sure and select the correct zone
number using the " " or " " button so that the measurement is
registered to the appropriate zone.
Storing, recalling, and erasing
measurement data
Erasing data
*Press "MEMORY" into Memory mode.
*Press and hold on "MODE" button and then press "
" button, all
measurement data will be erased.
*To confirm the data has been erased, press the "MEMORY" button
and no data should appear.
•