Filter
Top Products
E-2
?
WHAT DISPLAY SYMBOLS MEAN
?
Display
Symbol
Battery Full
Battery Low
PULSE DISPLAY ERROR
Recommended
Action
Measurement is in progress,
remain as still as possible.
Take measurement again and
consult with your physician.
Replace all batteries with new
ones when the symbol blinks.
Alkaline batteries recommended.
Try the measurement again.
Remain very still during the
measurement.
Fasten the cuff correctly, and try
the measurement again.
Check cuff to ensure fit and
fastening is correct, and
measure again.
Refasten the cuff and retake
measurement.
Try the measurement again.
Remain very still during
the measurement.
Measurement is in progress,
remain as still as possible.
Refer to the section “About
Pressure Rating Indicator™” for
further explanation
Condition/Cause
The symbol shown while
measurement is in progress. It
blinks while detecting the
pulse.
An irregular heartbeat or
body movement may have
occurred. Refer to page E-8
for more information on
irregular heartbeats.
Previous measurement stored
in MEMORY.
The battery power indicator
during measurement.
The batteries are low when it
blinks.
Unstable blood pressure due
to excessive body movement.
The systolic and diastolic
values are within 10 mmHg
of each other.
The pressure value did not
increase during inflation.
The cuff is not fastened
correctly.
The pulse is not detected
correctly.
Cuff Inflation Meter
Pressure Rating Indicator™
LifeSource Health Line (Toll-Free): 1-888-726-9966