Harrington Hoists EDCK2 Personal Lift User Manual


  Open as PDF
of 4
 
ED1050 KITS
EDCK1 & EDCK2
INSTALLATION INSTRUCTIONS
1050LB CAPACITY
2 of 4
GENERAL USE
EDOC0321, REV 00
9/28/05
2.4 Install the cushion rubber (from ED525) and stopper complete set (from ED525) on the no-load side of
the load chain.
2.5 Install the appropriately sized chain container (Figure 43), for the load chain length using Socket Bolt BP
(Figure 44), U nut (Figure 45) and Split Pin (Figure 46). Refer to Owner’s Manual.
2.6 Attach Nameplate B (Figure 47) to hoist as shown in Figure 1-1.
2.7 Attach the Warning Seal E label, Figure 49, to hoist as shown in Figure 1-1.
2.8 Attach Nameplate M, Figure 50, to hoist as shown in Figure 1-1.
Figure 1-1
 previous next