Filter
Top Products
Safety and Maintenence
Keep hands feet and other objects clear of platform as it lowers to the ground.
Always verify that scooter is securely held down to the lift before attempting to transport.
On some scooters it may be necessary to temporarily move the steering tiller forward to clear the
hold down arm as it lowers into the locked position
Scooters equipped with pneumatic (air-inflated) tires must have properly
inflated tires at all times. Improper tire inflation may change the height of the deck, thereby
changing the hold-down force required.
Use caution when driving over speed bumps, potholes, railroad tracks or other sudden road changes.
Failure to drive carefully and slowly over such obstacles can result in damage to your lift, vehicle or
scooter.
Use care when entering steep driveways. Enter and exit at an angle to avoid dragging lift on the
ground.
Always confirm that lift platform has been fully raised before transporting scooter or unoccupied lift.
Failure to do so can result in serious damage to you lift or vehicle.
Manual Override Feature
This lift is equipped with a Manual Override feature for use if the vehicle or the lift should ever lose power.
Harmar recommends the manual override be used only by Harmar Mobility Authorized Dealers and qualified
mechanics such as roadside assistance technicians.
To ensure safety the lift must be unplugged and the key turned to the off position before manual backup is
engaged. To engage manual backup remove the cap from the top of motor box cover and, using a 3/8"
socket, turn the wrench clockwise to raise the lift or counter clockwise to lower the lift.
CAUTION: TO AVOID THE RISK OF SERIOUS INJURY, NEVER
ATTEMPT TO OPERATE THE MANUAL OVERRIDE WHILE THE LIFT IS
PLUGGED IN TO THE VEHICLE.