Harmar Mobility CPL400 Personal Lift User Manual


 
Installing the Platform
Step 1
The mounting bolts, nuts and spacers that
secure the platform to the lift carriage are
packaged in the small parts box. Begin by
locating these pieces and setting aside.
Step 2
Position the platform by aligning the support
legs with the carriage flanges that protrude
from the front cover.
Step 3
Align the four mounting holes and insert a ½”
x 3” bolt into each hole. The upper holes
have a spacer that must be placed in
between the carriagne flange and platform
leg. Install the locknut on each bolt and
tighten sufficiently (approx. 50 lb-ft.).
Step 4
Plug in the harness for the platform safety
pan and unplug the safety pan jumper on the
controller (ref pg 5). Secure the harnesses
under the clip on top of the carriage flange.
6