Harbor Freight Tools 90018 Mobility Aid User Manual


 
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this product, basic safety precautions should always
be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Avoid working alone. If an accident happens, an assistant can bring help.
2. Keep work area clean. Cluttered areas invite injuries.
3. Observe work area conditions. Keep work area well lighted.
4. Keep children away. Children and pets must never be allowed in the area
when you are loading or unloading a vehicle with the Ramp. Do not let them
climb or walk on Ramp.
5. Store idle equipment. When not in use, the Ramp must be stored in a dry
location to inhibit rust. Always lock up Ramp and keep out of reach of
children.
6. Dress properly. Do not wear loose clothing or jewelry as they can be
caught in moving parts. Protective, electrically nonconductive clothes and
nonskid footwear are recommended when working. Wear restrictive hair
covering to contain long hair. Protect your hands with heavy duty work
gloves.
7. Use eye protection. Always wear ANSI approved impact safety goggles.
8. Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across electrical cables or frames.
9. Always wear gloves when handling the ramps.
10. Maintain Ramp with care. Inspect Ramp periodically, and if damaged, have
it repaired by an authorized technician.
SKU 90018 Page 2
Open Dimensions 45” W x 69” L x 2-5/6” H
Folded Dimensions 14-7/8” W x 69” L x 5-1/2” H
Tongue Dimensions 3-7/8” W x 12-1/8” L (20 degree angle)
Rung Width 10-5/8” W