Harbor Freight Tools Item 99917 Scale User Manual


 
Page 2 For technical questions, please call 1-800-444-3353. Item 99917
REV 08g, 09c, 11a, 11b, 12h
Specifications
On - Off
Tap on - Auto Off after 5
seconds of non use.
LCD Size 1-1/8" H X 2-7/8" W
Power Supply
2 - 3V Lithium-Ion Batteries
(Included) (2 x CR-2032)
Capacity
5~330 lb. in .2 lb. increments
2.5~150 kg in .1 kg increments
Important Safety Information
WARNING! To prevent serious injury:
1. Do not use if wet.
2. Do not exceed 330 lb. maximum weight.
3. This product is not a toy. Do not
drop, or allow children to play with,
or use this Scale unattended.
4. Use only on level, hard, flat surface.
Using on cushioned surface (such as
rug or carpet) may cause uneven
load, causing inaccurate readings
and increasing the risk of damage.
5. Do not jump on this Scale.
6. Maintain product labels
and nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
7. Use as intended only;
not for trade or postal use.
Operation Instructions
1. Place the Bathroom Scale on a
hard, flat, smooth surface.
2. Tap the Scale with your foot to turn
it on. It will flash “18888” and then
“0.0” to signify it is ready. Step evenly
onto the Scale and stand motionless
to see your weight appear in Display.
3. The scale will return to “0.0” once you
step off and then automatically turn off.
NOTE: When the Batteries are low, the
Display will read “LO”. Follow the battery
replacement procedures in the
“MAINTENANCE” section of this manual.
NOTE: Press the Mode Switch to the
left of the battery housing (see photo) to
toggle between “kg” (kilogram), “lb” (pound)
and “st” (stone) weight measurements.