Filter
Top Products
Page 2SKU 97227 For technical questions, please call 1-800-444-3353.
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in
the back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
GENERAL SAFETY RULES
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not exceed the maximum weight capacity of 45 pounds.
Keep children and bystanders away while operating a tool. Distractions
can cause you to lose control.
Stay alert, watch what you are doing and use common sense when operating
a tool. Do not use a tool while you are tired or under the inuence of drugs,
alcohol or medication. A moment of inattention while operating tools may result
in serious personal injury.
Use safety equipment. Always wear eye protection. Safety equipment
such as dust mask, non-skid safety shoes, work gloves or hearing
protection used for appropriate conditions will reduce personal injuries.
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the tool in unexpected situations.
Store idle tools out of the reach of children and do not allow persons
unfamiliar with the tool or these instructions to operate the tool. Tools are
dangerous in the hands of untrained users.
Position batteries in proper polarity. Do not install batteries of different types,
charge levels, or capacities together.
Maintain labels and nameplates on the tool. These carry important safety
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
This product is not a toy. Keep it out of reach of children.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.