Harbor Freight Tools 94569 Scale User Manual


  Open as PDF
of 4
 
SKU 94569 For technical questions please call 1-800-444-3353. Page 3
Unpacking
When unpacking your Digital Fish Scale, check to make sure that the product is intact and
undamaged. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS
at: 1-800-444-3353.
Operation
Your Digitial Fish Scale requires no assembly. It is important that you read the entire manual to
become familiar with the product BEFORE you use the Digital Fish Scale.
Do not bump or shock the Fish Scale when it is in operation or being transported. Rough
treatment may damage the highly sensitive mechanism.
Weighing the Fish
1. Insert a 9V battery (not included) into the Fish Scale-see Changing Battery section for
additional information.
2. Press the On/Off Button down for two to three seconds to turn the Scale “ON” and
activate the LED light. The LCD readout will display 0.00 and will flash when power is “ON”-
see Figure 1.
3. The Fish Scale can be held by hand or hung from the loop at the top of the Scale. Place the
fish onto the Hook. Press the Hold Button down while the fish is being weighed; the Hold
Indicator light will go on-see Figure 2.
The Scale will register the weight of the fish in Lbs. Pressing the Hold Button down a
second time will bring the Scale back to zero.
Total Weight for More Than One Fish
1. Each time you weigh an individual fish, press down on the Memory Button. The memory
indicator light will go on-see Figure 2. Press the Total Button down to total the cumulative
weight of each fish that was entered into Memory. Up to ten fish can be entered into
Memory and added together to obtain a total weight.
2. To clear the Memory, press the Memory Button for two seconds. The LCD readout
will flash four times to verify that the memory has been cleared.
Battery
Compartment
Figure 2
On/Off Button
Hold Button
Total
Memory
Figure 1
 previous