Harbor Freight Tools 92987 Mobility Aid User Manual


 
SKU 92987 For technical questions please call 1-800-444-3353. Page 2
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please
complete the owner’s record below:
Model
______________ Serial No._____________ Purchase Date_______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
Seven Handle Adjustments: Minimum height of 28-1/8” to maximum height of 32-3/8”
Floor to Seat: 18-1/2 “
Seat Dimensions: 13” x 14”
Wire Basket: Included
Maximum Weight Capacity: 250 Lbs.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Keep work area well lighted.
3. Store idle equipment. When not in use, the Walker can be folded up and stored in a dry
location.
4.
Use the right product for the job. There are certain applications for which the Walker was
designed. Do not modify the Walker and do not use the Walker for a purpose for which it was not
intended.
5. Check for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.
6. Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
7. Do not operate product if under the influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there
is any doubt, do not operate the product.
8. Use eye protection. Always wear ANSI approved impact safety goggles when assembling
this product.
9. Do not exceed the product’s maximum load capacity of 250 Lbs.