Filter
Top Products
Page 4 For technical questions, please call 1-800-444-3353. Lever Chain Hoist
67144 – 1/4 Ton
Operating Instructions
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Note: For additional information regarding the
parts listed in the following pages, refer to the
Assembly Diagram near the end of this manual.
Figure B: 67144 Controls
Load Hook
safety latch
safety latch
Top Hook
Lever
Handle
Selector
Lever
WARNING! Verify that the load weighs
less than the capacity of your Hoist model,
as listed in the Specications chart.
Attachment point must be rated to support
the combined weight of hoist and load.
1. Attach the Hoist to the connection
point by sliding the Top Hook onto it.
TheTopHookmustttheconnectionpoint
securely, with the safety latch fully engaged,
as shown in Figure A, on the right.
Figure A: Incorrect and
Correct Hook Attachment
2. Turn the Selector Lever to the neutral position
(see Figure C) to disengage the ratchet.
Selector
Lever
Figure C: 67144 Selector Lever
Neutral Position
3. Pull the load chain by hand and
attach the Load Hook to the load.
The safety latch should be fully engaged.
Do not suspend a load on just the
end of the hook, see Figure A.