Harbor Freight Tools 66342 Electric Shaver User Manual


 
SKU 66342 For technical questions, please call 1-800-444-3353. Page 3
If necessary, use Brush (6) to clean hair trim-5.
mings from exposed Shaver cutting heads.
If necessary, slide old Foil from out of Foil 6.
Holder and rinse trimmings off Foil.
If Foil must be replaced, slide the new Foil 7.
into Foil Holder so that small hole in the
center of the Foil slides over small tab in the
middle of the Foil Holder cross bar. This will
hold Foil in place.
Slide the Shaver housing into the Foil Holder 8.
until it snaps into place.
Slide the Cover onto Shaver head until ready 9.
to use.
Recharge if necessary.10.
REMOVING THE BATTERY
By law, the Ni-Cd battery must be removed 1.
from housing before Shaver disposal.
Use a screwdriver to unscrew the Shaver 2.
head from the top of the housing.
Pry off the label from the housing bottom and 3.
unscrew bottom from housing.
Pry front panel off Power Switch and remove 4.
screw from front panel.
Slide battery holder out of housing. Remove 5.
and properly dispose of Ni-Cd battery.
PARTS LIST & DIAGRAM
Part Description Qty.
1 Shaver 1
2 Foils 2
3 Foil Holder 1
4 Cover 1
5 Charger 1
6 Brush 1
7 Carrying Sleeve 1
8 Power Switch 1
Record Serial Number Here:
Note: If product has no serial number, record month and
year of purchase instead.
Note: Some parts are listed and shown for illustration
purposes only, and are not available individually
as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED
THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY
OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL
REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER.
THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS
OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
1
8
2
3
4
6
7
Please note: Charger (5) is not shown.