Harbor Freight Tools 40195 Electric Shaver User Manual


 
Page 4SKU 40195
For technical questions, please call 1-800-444-3353.
CHARGING INSTRUCTIONS
Note: All numbers referenced below refer to the parts listed on page 6 of this manual.
Rechargeable Shaver (1) is charged by attaching Power Cord (4) to Shaver and
electrical outlet. Push the Switch (5) down. Charging Indicator Light (3) will tell you
that charging is taking place. This will take 8-16 hours to charge. When fully charged,
your shaver can be used about 7 days. When charge is complete, disconnect power
cord.
4
3
5
Charging more than 16 hrs. can damage the life of the battery. Battery is sealed in
Shaver casing (1) and cannot be replaced.
OPERATION INSTRUCTIONS
Take off Protective Cap (7). Push Switch (5) up. Using a soft touch to your skin, move
Shaver in the opposite direction of hair growth. Stretching the skin gives you a closer
shave. Once shaving is done, push Switch down and replace Protective Cover.
Trimmer Operation
Flip up Trimmer (2) on back of Shaver (1).
At a right-angled direction, softly touch your skin where you want to trim. Work
slowly.
When finished trimming, push Trimmer (2) back into flat position.
Cleaning / Maintenance
2
9 10
After using, clean Shaver’s Three Cutting Heads (9) with Brush (8) after removing
Plastic Foil Cover (10). When clean, replace cover. Cleaning your Shaver will help
keep it working at maximum efficiency. Caution: Be careful not to pinch or cut
fingers when cleaning cutting heads.
1.
2.
1.
2.
3.