Filter
Top Products
14 15
ACCESSORIES
Standard Fluoride Solutions
HI 4010-00 TISAB II fluoride solution, 500 mL bottle
HI 4010-01 0.1 M fluoride solution, 500 mL bottle
HI 4010-02 100 ppm fluoride solution, 500 mL bottle
HI 4010-03 1000 ppm fluoride solution, 500 mL bottle
HI 4010-05 TISAB II fluoride solution, 1 gallon bottle
HI 4010-10 10 ppm mixed with TISAB II fluoride solution, 500 mL
HI 4010-11 1 ppm mixed with TISAB II fluoride solution, 500 mL
HI 4010-12 2 ppm mixed with TISAB II fluoride solution, 500 mL
HI 4010-30 Kit of fluoride solutions including HI 4010-00, HI 4010-
10 and HI 4010-11
Maintenance Solutions
HI 7061M General purpose cleaning solution, 230 mL bottle
HI 8061M General cleaning solution, 230 mL FDA bottle
HI 7061L General cleaning solution, 500 mL bottle
HI 8061L General cleaning solution, 500 mL FDA bottle
HI 7073M Protein cleaning solution, 230 mL bottle
HI 8073M Protein cleaning solution, 230 mL FDA bottle
HI 7073L Protein cleaning solution, 500 mL bottle
HI 8073L Protein cleaning solution, 500 mL FDA bottle
HI 7077M Oil and fat cleaning solution, 230 mL bottle
HI 8077M Oil & fat cleaning solution, 230 mL FDA bottle
HI 7077L Oil and fat cleaning solution, 500 mL bottle
HI 8077L Oil & fat cleaning solution, 500 mL FDA bottle
HI 7082 3.5M KCl electrolyte solution, 4 x 50 mL bottle
HI 8082 3.5M KCl electrolyte solution, 4 x 50 mL FDA bottle
Other Accessories
HI 4010 Fluoride electrode with BNC and 1 m (3.3') cable
HI 5313 Reference electrode with 1 m (3.3') cable
HI 7662 Temperature probe with 1 m (3.3') cable
HI 76405 Electrode holder
CE DECLARATION OF CONFORMITY
All Hanna Instruments meters are warranted for two years against defects in
workmanship and materials when used for their intended purpose and main-
tained according to instructions.
Electrodes and probes are warranted for a period of six months.
This warranty is limited to repair or replacement free of charge. Damages due to
accidents, misuse, tampering or lack of prescribed maintenance are not covered.
If service is required, contact the dealer from whom you purchased the instru-
ment. If under warranty, report the model number, date of purchase, serial
number and the nature of the failure. If the repair is not covered by the warranty,
you will be notified of the charges incurred. If the instrument is to be returned to
Hanna Instruments, first obtain a Returned Goods Authorization number from the
Customer Service department and then send it with shipping costs prepaid.
When shipping any instrument, make sure it is properly packaged for complete
protection.
WARRANTY
Recommendations for Users
Before using this product, make sure that it is entirely suitable for the environment in which it is used.
Operation of this instrument in residential areas could cause unacceptable interferences to radio and
TV equipment.
Any variation introduced by the user to the supplied equipment may degrade the instrument's EMC
performance. To avoid electrical shock, do not use these instruments when voltages at the measure-
ment surface exceed 24 Vac or 60 Vdc.
To avoid damages or burns, do not perform any measurement in microwave ovens.