A SERVICE OF

logo

ENGLISH
27
CLEANING AND CARE
___________________________
Cleaning and care
1 Switch off the appliance and
unplug it from the mains.
2 Remove the attachment and
clean the blade head with the
brush supplied.
Caution
7
If cleaning with the brush is not
sufficient, you can also rinse the
attachment under running water.
However, only do this once the
attachment has been removed.
7
The cutting head on the attachment
does not normally need to be
oiled. If you clean the attachment
under running water regularly but
you also want to maintain the
original condition of the cutting
head for as long as possible, it is
worth oiling it at regular intervals
with the oil provided.
3 Use a soft, dry cloth or the brush
supplied to clean the appliance
housing and the charging unit.
Caution
7
Never put the appliance, charging
unit or power supply unit in water
or any other liquid.
4 Before using the appliance
again, dry all the attachments
properly using a soft towel.
5 Do not use any cleaning agents.
Note
7
Remove any clippings after each
use.