Filter
Top Products
ENGLISH
23
CLEANING AND CARE
___________________________
Cleaning and care
1 Switch off the appliance and
unplug it if you are running it
from the mains.
2 Take off the comb and clean the
blades with the brush supplied.
3 Only clean the housing and the
comb with a damp, soft cloth.
Note
7
Never immerse the appliance,
lead or mains adapter in water
or other liquids.
4 Before using the appliance
again, dry all parts completely
using a towel.
5 Do not use cleaning agents.
6 Put on the protective cover sup-
plied.
Note
7
Remove any clippings after each
use.
Adjusting the blades
When new, the blades are optimally
aligned. However, you need to
readjust the blades if you replace
them or if you have removed the
lower blade for cleaning.
1 Loosen the screws.
2 Align the teeth of upper blade
(ceramic) and the lower blade
(stainless steel). The points of the
teeth on the upper blade should
be roughly 1.2 mm behind those
of the lower blade.
3 If the blades are not correctly
aligned, switch off the
appliance, loosen the screws
again and readjust the blades.
4 Tighten the screws once you
have aligned the blades.