Filter
Top Products
ENGLISH
5
Settings
Your appliance has the following settings:
Temperature level/blower level
– 0: Off
– 1: Gentle air flow and moderate temperature
for gently drying and styling
– 2: Strong air current, high temperature for
quick drying
Cool shot
– ❄: Interrupts heating and provides a cool air
flow
Changing the styling
attachments
1 Detach the attached styling attachment by
pressing on the catch (on the back of the appli-
ance) and turning the hot air brush slightly
to the right.
2 Place another styling attachment on so that the
recess and the catch (on the back of the
appliance) are in line and turn slightly to the
left until it clicks.
B
B
A
F
C
Operation
Check if the mains voltage on the type plate (on
the handle of the device) corresponds to your
local mains supply.
1 Thoroughly towel dry your hair after washing.
2 Plug the power cord into the wall socket.
3 Turn on the appliance with the switch and
set the required temperature level/blower level.
4 If necessary, interrupt heating by pressing and
holding down the button (Cool Shot).
Note
7
Cool Shot interrupts heating and provides a
cool air flow. This allows you to fix your hair-
style better and more lastingly.
5 After use, switch off the appliance with the
switch and pull the plug of the mains
cable out of the socket.
Note
7
Never wind the mains cable around the appli-
ance, because this can cause damage.
Please check the appliance and the cable regu-
larly for visible damage.
Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing.
Remember to clean the air inlet grille occa-
sionally with a soft brush to remove hairs and
dust.
G
D
C
G
C
D
OPERATION
__________________________________________________________