Grundig hs 4020 Hair Dryer User Manual


 
ENGLISH
5
Settings
Your appliance has the following setting
options:
Temperature level/blower level
0 : off
1 : gentle air flow and moderate temperature
for gentle drying and styling
2 : stronger airflow and high temperature for
fast drying and styling
Cold air setting
: interrupts the hot air supply and provides
cold air for fixing a hairstyles
Changing the styling attachments
1 Remove the styling attachment currently in
place by pressing the catch and pulling off
the heated brush.
2 Place on a different styling attachment and
allow to latch in place. The two markings (
.
)
must be opposite each other.
Notes:
7
The size of curls depends on the diameter of
the styling attachment in use.
7
The styling attachment with a diameter of
25 mm creates small and medium curls and is
especially suitable for short hair.
7
The styling attachment with a diameter of
38 mm can be used to attain greater volume
with longer hair.
B
C
C
Operation
Check if the mains voltage on the type plate (on
the handle of the appliance) corresponds to
your local mains supply.
1 Towel dry your hair thoroughly after washing.
2 Plug the power cord into the wall socket.
3 Turn on the appliance with the switch and
set the temperature/blower level.
4 If required you can interrupt the hot air sup-
ply when drying by turning the switch to
»« (cold air setting).
Note
7
The cold air setting interrupts the hot air oper-
ation and provides a cool air flow. This
allows you to fix your hairstyle better and
more lastingly.
5 After use, switch off the appliance with the
button and pull out power cord from
the wall socket.
Caution
7
Never wind the power cord around the appli-
ance, as this can result in damage.
Check the power cord and the appliance
regularly for visible damage.
Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft dry cloth for cleaning the housing.
Remember to clean the air inlet grille occa-
sionally with a soft brush to remove any hairs
and dust.
E
D
C
C
C
D
OPERATION
___________________________________________________________