Filter
Top Products
4
ENGLISH
Operation
Check if the mains voltage on the type plate (on
the handle of the device) corresponds to your
local mains supply.
1 Thoroughly towel dry your hair after washing.
2 Attach the concentrator nozzle if required.
3 Plug the power cord into the wall socket.
4 Turn on the appliance with the switch and
set the required blower level.
5 If necessary, interrupt heating by pressing and
holding down the button (Cool Shot).
Note
7
Cool Shot interrupts heating and provides a
cool air flow. This allows you to fix your hair-
style better and more lastingly.
6 After use, switch off the appliance with the
switch and pull the plug of the mains
cable out of the socket.
Note
7
Never wind the mains cable around the
appliance, because this can cause damage.
Please check the appliance and the cable regu-
larly for visible damage.
Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing.
Remember to clean the air inlet grille occa-
sionally with a soft brush to remove hairs and
dust.
G
A
B
D
B
A
F
Environmental note
This product has been made from high-quality
parts and materials which can be re-used and
recycled.
Therefore, do not throw the product away with
normal household waste at the end of its life. Take
it to a collection point for recycling electrical and
electronic devices. This is indicated by this symbol
on the product, in the operating manual and on
the packaging.
Please find out about collection points operated
by your local authority.
Help protect the environment by recycling used
products.
Technical data
This product fulfils the European
directives 89/336/EEC and
73/23/EEC.
Power supply
230-240 V, 50 Hz
Power
2000 W
HAIR DRYER HD 5580
________________________________________
Technical and design modifications reserved.