Filter
Top Products
Model T10007 300 Kg Digital Crane Scale -5-
Mounting and Loading Hardware
When attaching harware to the crane
scale:
• DO NOT attach multiple chains or har-
nesses directly to the scale. Only one
point of contact should be used on the
hook and shackle to lessen the chance
of the load falling and to allow proper
load alignment.
• DO NOT attach oversized items or har-
nesses directly to the scale. Oversized
loading hardware create multiple points
of contact and will not fit properly with
the crane scale hardware. Inaccurate
readings, uneven, and dangerous loads
may result.
Refer to Figures 2 & 3 for the dimensions
of the Model T10007.
Figure 2. Scale front view measurements.
8
3
⁄4"
4"
13
⁄16"
2
3
⁄4"
3
⁄4"
Figure 3. Scale side view measurements.
Like all tools there is potential danger
when operating this tool. Accidents
can be caused by lack of familiarity
or failure to pay attention. If normal
safety precautions are overlooked
or ignored, serious personal injury
may occur.
To maintain accuracy, the scale
should remain hanging and not be
allowed to rest on the ground for a
significant amount of time.