Graham Field MM7014 Personal Lift User Manual


 
!)-2%-!-#%-1/%#2).-.&++
.,/.-%-21%#%)/2.&1()/,%-2
• Make sure all parts/components are included (see pages
C1 through C8 for parts lists and diagrams)
• Check all bed components for obvious damage
• Inspect the Power Supply Cord for any cuts and/or damage
• Check to see all actuator cords are routed and connected
properly to the control box
%#(!-)#!+-1/%#2).-.& 11%,"+)%1
,.-2(1
• Inspect all welds on the sleeping surface, frame, and base
assemblies for stress fractures
• Inspect all fasteners for wear and looseness
• IMPORTANT: Lubricate all pivot points as needed.
Aerosol White Lithium Grease is recommended.
%#(!-)#!+-1/%#2).-.&!12%01
7%!0
• Check all locks on locking casters to ensure they are
operational
• Check all casters to ensure that they roll properly and
are unobstructed
+%#20)#!+-1/%#2).-.&.-20.+.6
,.-2(1
• Check the power cord connected to the control box for
any chafing cuts or wear
• Make sure all attaching hardware is securely tightened
• Check all electrical connections for any wear or fractures
+%#20)#!+-1/%#2).-.&%-$!-2
!-$12!&&#.-20.+,.-2(1
• Check the pendant cord for any chafing cuts or wear
• Check all pendant functions . . .
Head raises and lowers properly
Foot raises and lowers properly
Entire bed raises and lowers properly
• Check to make sure each button and associated function
work properly (i.e. the head section raises when the Head
Up button is activated)
+%#20)#!+-1/%#2).-.&#23!2.01
,.-2(1
• Check the actuator cords for any chafing cuts or wear
• Check the range of movement on all motors to ensure they
do not bind in theFull Up and Full Down positions
WARNING: Possible Shock Hazard. Please unplug the Power Cord from the electrical outlet before
performing any maintenance/service to the Power Box.
!
2D:4>6C:42?#65:42=&C@5F4ED25:G:D:@?@762=E9&C@5F4ED?4K#2EC:IK(,#2?F2= &
ECOMMENDED MAINTENANCE & INSPECTION SCHEDULES
R