Filter
Top Products
LF2020-INS-LAB-RevC12
8
5 ASSEMBLY INSTRUCTIONS
WARNING: The lift is heavy. To avoid personal injury, DO NOT attempt to assemble the
lift without assistance.
1. Remove the nuts and bolts from top and bottom of mast.
2. With one hand on the mast and another on the boom, pull the mast to an upright position.
3. Reinstall the bolts in the holes at bottom of mast and hand tighten them.
4. Attach boom to mast and hand tighten bolt and nut.
5. Attach the L-shaped arms to the back of the knee pad.
6. Attach knee pad assembly to the mast.
7. Place the control box in the bracket.
8. Insert the actuator plug into the control box.
9. Insert the pendant plug into the control box.
10. Tighten all nuts.
WARNING: Before using Patient Lift, ensure that lift is assembled as described, that all
attaching hardware is securely tightened, and that all lift components are secure.
Info: Before using the lift, charge the batteries for ten to twelve hours (see instructions on
following page).