Filter
Top Products
LF2020-INS-LAB-RevC12
10
6 OPERATING INSTRUCTIONS
WARNING: During lifting and lowering, whenever possible, always keep the base legs of
the lift in the widest position.
WARNING: Use only Lumex slings specially designed for the LF2020 Easy Lift STS /
LF2090 Bariatric Easy Lift STS.
WARNING: DO NOT use torn, cut, frayed or broken slings as injury could result.
WARNING: Do not put anything (e.g. cushion, pad, etc.) between the user and the sling.
This may cause user to slide out of the sling and could cause injury.
WARNING: GF Health Products, Inc. strongly recommends that two caregivers take part
in the lifting process.
Info: Instructional videos that review the application of several sling styles and lifting
scenarios are available at www.grahamfield.com.
Info: While transferring a patient, the patient lift legs can be in either open or closed
position.
Preparation before lifting
1. Turn on the power by turning the RED RESET BUTTON clockwise.
2. Press the pendant UP or DOWN button once.
3. After the battery indicator lights de-illuminate, push the pendant UP button and DOWN button
to ensure the lift is operating correctly.
4. Position the lift base around or under the patient.
5. Widen the base.
Fitting Lumex Sit-to-Stand Sling
WARNING: The Lumex Sit-to-Stand sling is not suitable for patients who have involuntary
movements, or patients with limited postural control.
WARNING: Ensure the sling you are using has adequate weight capacity for the person
you are lifting.
1. Position the patient in a sitting position.
2. Slide the sling down patient’s back to lumbar position.
3. Draw the shoulder straps to the front of the patient close to the chest.
4. Draw the waist belt around patient’s waist and press hook and loop sections together to fasten.
5. Place shoulder straps inside the positioning loop.
6. Attach the shoulder straps to the hooks.