Filter
Top Products
2
LF1007 / LF1009A: Lift Scale Kit Operation Instructions
Graham-Field Health Products, 11/03
OPERATING INSTRUCTIONS
Warning: For proper lifting procedure, follow instructions in Patient Lift Owner's Manual while
operating scale.
Warning: Do not use patient lift / scale system to transport patient.
1. Press the ZERO button to set the scale system to Zero. “0” will pan
across the screen for several seconds; display will then read “0.0”.
2. Press the Kg/Lb button to choose the display mode (Kilograms or
Pounds).
3. Remove the sling/stretcher from the swivel bar.
4. Position the patient.
5. Re-attach the sling/stretcher to the swivel bar.
6. Carefully lift the patient.
7. When motion has stabilized, press the OPERATE button to display the
weight data. Do not touch the patient or sling/stretcher during this step.
Note: The scale system automatically goes to sleep after 60 seconds to
conserve the battery. To wake the system, press the OPERATE button.
8. When the weighing process is complete, lower the patient carefully.
9. Press the ZERO button to re-Zero the scale system, with sling attached and empty, before each weighing.
Battery Replacement
The Lift Scale is powered by one 9-Volt battery, which should provide
approximately 3,000 readings (when using 9-Volt Lithium battery) before
replacement is needed. When the battery needs replacement, an indicator
will appear on the display. To replace the battery:
1. Open access door on back of scale.
2. Remove old battery from terminals.
3. Install new battery on terminals.
4. Close access door. Ensure that access door is securely closed before using
scale.
Note: The battery load cell contains no user-serviceable components, and
should be serviced by qualified personnel only.
WARRANTY
One year limited warranty. For additional warranty information, please contact your Lumex dealer.
Graham-Field Health Products
Atlanta, Georgia 30360
printed in U.S.A.
patient lift scale
operation buttons
Kg/Lb button
Operate button
Zero button
display
battery access door